Instructions
Dosing quantities swim spas
DAY 1
- Fill the pool with water.
- Add Calcium Ex and Shock.1
- Check pH value, regulate to 6.5 - 6.8 2
DAY 2
- If the water is clear and odourless, you can bathe from now on.
- Add Lotus Clean Basic after bathing.
- Check pH value, regulate to 6.5 - 6.8 2
DAY 3 - 6
- Check pH value, regulate to 6.5 - 6.8. 2
- After bathing, add Shock to the water, 5ml per person, but at least 10ml per bath.
DAY 7
- Check pH value and clean filter.
1 There should always be 0.3 mg/l shock in the water during the first two weeks. Measured on the day after addition.
2 As long as the pH value rises on its own, adjust the pH value daily to 6.5 - 6.8. If the pH remains stable, it should be kept between 6.8 and 7.2.
Procedure in regular operation
Month 1-5
1. Once a week:
- Check pH value. 2
- Clean filter.
- Add Lotus Clean Basic and Shock.
NOTE: There should always be approx. 10 minutes between the addition of Shock and Lotus Clean Basic.
2. Add Shock to the water after each bath, 5ml per person, minimum 10ml per bath.
3. Dose Calcium Ex monthly: 50ml/1000 l and proportionately when you top up with water.
Every 6 months, at the latest every 12 months
- Carry out cleaning S
- Change water and refill
Instructions Dosing quantities swim spas Procedure for refilling DAY 1 Fill the pool with water. Add Calcium Ex and Shock. 1...
read more » Close window
Instructions
Dosing quantities swim spas
DAY 1
- Fill the pool with water.
- Add Calcium Ex and Shock.1
- Check pH value, regulate to 6.5 - 6.8 2
DAY 2
- If the water is clear and odourless, you can bathe from now on.
- Add Lotus Clean Basic after bathing.
- Check pH value, regulate to 6.5 - 6.8 2
DAY 3 - 6
- Check pH value, regulate to 6.5 - 6.8. 2
- After bathing, add Shock to the water, 5ml per person, but at least 10ml per bath.
DAY 7
- Check pH value and clean filter.
1 There should always be 0.3 mg/l shock in the water during the first two weeks. Measured on the day after addition.
2 As long as the pH value rises on its own, adjust the pH value daily to 6.5 - 6.8. If the pH remains stable, it should be kept between 6.8 and 7.2.
Procedure in regular operation
Month 1-5
1. Once a week:
- Check pH value. 2
- Clean filter.
- Add Lotus Clean Basic and Shock.
NOTE: There should always be approx. 10 minutes between the addition of Shock and Lotus Clean Basic.
2. Add Shock to the water after each bath, 5ml per person, minimum 10ml per bath.
3. Dose Calcium Ex monthly: 50ml/1000 l and proportionately when you top up with water.
Every 6 months, at the latest every 12 months
- Carry out cleaning S
- Change water and refill
No results were found for the filter!
