Is cloudiness of the whirlpool water the next day a sign that the amount of Lotus Clean Basic was too low and it has been used up? Or can I also overdose it?
After using Lotus Clean water care, there is a considerable build-up of foam in the whirlpool tub. What could be the cause of this?
The Lotus Clean System Wash instructions state that the filters should remain in the whirlpool after the agent has been added. Does this also apply to a Softub?
Can we use Lotus Clean products in combination with our salt water disinfection system to care for our water so that we can use our hot tub again without worrying?
Can you advise me how to clean the whirlpool and the pipes before I use the pool again after an eight-week break?
Can you advise me how to clean the whirlpool and the pipes before I use the pool again after an eight-week break?
Is there a minimum temperature in the whirlpool that is necessary for the effectiveness of Lotus Clean products? We would like to operate the whirlpool at a temperature between 20 and 25 degrees in summer.
Would it be possible to use Lotus Clean now despite the chlorinated whirlpool water? Or should we wait three months before changing the water?
How do you measure the amount of Lotus Clean Shock with the Poollab photometer in the whirlpool? And up to what concentrations can the water be used?
Our filter in the whirlpool tub is very dirty, even though we care for the water with Lotus Clean products. What could be the cause?
We have a whirlpool with salt electrolysis. Can we use Lotus Clean Basic and Lotus Clean Shock despite the salt? Or would it be better to leave out the salt electrolysis altogether?
Unfortunately, the whirlpool water always becomes very milky after adding Lotus Clean. Can you please tell me where the problem could be coming from?
We are considering buying a Nordic hot tub and would like to know how we should maintain the water. Will we also need a filter?
Can I also add chlorine to the whirlpool when using Lotus Clean Shock or are these chemicals incompatible?
Can I use a BlueConnect measuring device to measure the value of Lotus Clean Shock in addition to the temperature and pH value in the whirlpool tub?
For some time now we have been getting a scratchy throat and a blocked nose after a short time when bathing in the Softub. What could be the cause of this?
I would like to know if I can store the chemicals outside near the whirlpool. Especially the liquids are probably not frost-proof?
Is Lotus Clean suitable for a Skargards Royal Hot Tub with closed backwash filter system? Are there any recommendations regarding the backwashing intervals and the filter material?
We would like to try out fragrance additives in the Softub. In many forums and groups, however, it is stated that additives deteriorate the water values. Can you tell us something about your scented pads?
Does it make sense to carry out a basic cleaning with System Wash before the winter break and the dismantling of our inflatable whirlpool, or would it be better to clean it in the spring when it is refilled?
Are Lotus Clean Basic and Lotus Clean Shock also suitable as additives for wood hot-tubs made of 100% wood? There is a stainless steel stove in the wood hot tub - how does the water treatment behave with it?
After adding Lotus Clean Basic, the water has become cloudy and has taken on a greenish colour. A yellowish layer of mist has formed on the bottom. What is the cause?
We have an inflatable whirlpool from Bestway. After refilling with water, we added Lotus Clean Shock as described. However, as soon as we add Lotus Clean Basic, the water becomes milky. What is the cause?
Brownish, slippery deposits have formed on the edge of my whirlpool and the pool floor is also very slippery. Can I also use Lotus Clean Shock to remove the biofilm in a salt water whirlpool? Do I then still need agents such as ph-Plus or ph-Minus?
Is it possible to dispense with Lotus Clean Shock if the whirlpool tub is equipped with an ozonator? Would it make sense to clean the whirlpool with System Wash and start with Lotus Clean when refilling?
After using Lotus Clean Shock a brown rim has formed in the whirlpool. We had previously used chlorine for water care. What is the cause?
I have a hot tub from Hotspring with the ceramic filters. Can I still use these ceramic filters if I use Lotus Clean for water care?
Our jacuzzi just got a pH of 6.0 according to test strips. It has only been used irregularly for some time and Lotus Clean was always added after the few uses. What do you recommend?